- Description
Contact: Peter Wen(General Manager)
Tel: +86 13906415399(Wechat)(Line)(whatsApp)
Skype: testing_machine
QQ 1067286983
http://www.honestyft.com
WAW-2000Y Computer Control Hydraulic UTM
Structure introduction
It is mainly used to execute the tension, compression, bending, shearing etc. test for all kinds of metal materials. Attached simple accessories and devices, it can be used to achieve many kinds of mechanical performances.
The oil cylinder is at the bottom of the load frame, tension space is at the upside of the load frame, compression and bending space is between lower crosshead and working table. The lower crosshead is driven by hydraulic motor so realize the adjustment of testing space.
The machine adopts load cell to measure load, use computer control & display load and test curve like Load-Time, Elongation-Time, Load-Elongation, Load-Displacement, Stress-Strain, Load-Strain, these could be switched displaying here
Main specifications
1 Max. Test load: 2000kN ( 200Ton )
2 Load range: 40kN-2000kN
3 Relative error of indicate value of load : ±1%
4 Max. Ram stroke: 260mm
5 Max. Tensile space: 1000mm(including piston stroke)
6 Max. Compression space: 900mm(including piston stroke)
7 Display: Computer control and display
8 Tensile grips for round specimen : φ15-φ70mm
9 Tensile grips for flat specimen: 0-60mm
10 Upper and lower platen size: 200mm×200mm
11 The span of bending: 450mm
12 Width of bending roller: 160mm
13 Dia. of bending roller: 50mm
14 Piston maximum speed: 80mm/min
15 Clamping mode: Hydraulic auto clamping
16 Transducer: load transducer
17 Deformation measuring: YYU50/10
18 Dimensions of load frame : Approximately 1400×850×3300mm
19 Dimension of Hydraulic controller : Approximately 1140×700×930mm
20 Dimension of Hydraulic Power: Approximately 1100×600×1000mm
21 All weight: about 8000kg
It is mainly used to execute the tension, compression, bending, shearing etc. test for all kinds of metal materials. Attached simple accessories and devices, it can be used to achieve many kinds of mechanical performances.
The oil cylinder is at the bottom of the load frame, tension space is at the upside of the load frame, compression and bending space is between lower crosshead and working table. The lower crosshead is driven by hydraulic motor so realize the adjustment of testing space.
The machine adopts load cell to measure load, use computer control & display load and test curve like Load-Time, Elongation-Time, Load-Elongation, Load-Displacement, Stress-Strain, Load-Strain, these could be switched displaying here
Main specifications
1 Max. Test load: 2000kN ( 200Ton )
2 Load range: 40kN-2000kN
3 Relative error of indicate value of load : ±1%
4 Max. Ram stroke: 260mm
5 Max. Tensile space: 1000mm(including piston stroke)
6 Max. Compression space: 900mm(including piston stroke)
7 Display: Computer control and display
8 Tensile grips for round specimen : φ15-φ70mm
9 Tensile grips for flat specimen: 0-60mm
10 Upper and lower platen size: 200mm×200mm
11 The span of bending: 450mm
12 Width of bending roller: 160mm
13 Dia. of bending roller: 50mm
14 Piston maximum speed: 80mm/min
15 Clamping mode: Hydraulic auto clamping
16 Transducer: load transducer
17 Deformation measuring: YYU50/10
18 Dimensions of load frame : Approximately 1400×850×3300mm
19 Dimension of Hydraulic controller : Approximately 1140×700×930mm
20 Dimension of Hydraulic Power: Approximately 1100×600×1000mm
21 All weight: about 8000kg
Contact: Peter Wen(General Manager)
Tel: +86 13906415399(Wechat)(Line)(whatsApp)
Skype: testing_machine
QQ 1067286983
http://www.honestyft.com
Tel: +86 13906415399(Wechat)(Line)(whatsApp)
Skype: testing_machine
QQ 1067286983
http://www.honestyft.com